Smok Pen – How to Change the Coil and Change the Flavour
The Smok Pen is fairly the interesting new electronic writing device. It is a pen which you can use to write on paper along with draw on with a pen or your finger. Nonetheless it does so much more. You are able to control its temperature, and you are able to use it to spray an elixir of e-liquid. This article will show you how to change your Smok Pen into an incredible vaporizer.
The body of the Smok Pen is made out of a durable stainless steel. That is what makes it so nice and sturdy. However, your body of this vaporizer is covered in a fabric material that is not heat sensitive. So it is perfect for anyone that might be allergic to heat. In addition, it works great if you work with it on a cold day. If you work with it outside for long periods of time, then you should consider obtaining a model which has a built-in compressor.
The very best of the Smok Pen is constructed out of black silicone material. Once you place the pen onto its heating element, it heats up the outer skin of the silicone which in turn causes it to expand. When it can that, a small reservoir is manufactured inside the pen’s body. Once you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you want to turn your Smok Pen into a vaporizer, then you Smok Novo 2 have to remove the metallic plate within the coil. On some models of Smok Pens, the plate within the coil is located between the tank and the body. Other models could have the plate located on the bottom. If you have a genuine Smok Pen, then removing the plate will not be easy at all. Many people have reported that they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
For those who have a genuine Smok Pen, then you should go ahead and take off the metal plate covering the coil. It is because the coil will be connected to a small metal sub-ohm tank. If you do not remove the plate, then your e-liquids which are stored within it will commence to heat up. When this happens, the e-liquids may turn into vapor instead of turning into liquid, and you risk getting burned.
Once you have removed the metallic cover, then you can access the two screws that are holding down the body of one’s Smok Pen. Carefully remove the screws, and then carefully remove the metal sub-ohm tank from the pen. It’s important that you place your hands under the Smok Pen, as it is extremely hot. Many papers have reported they burned their hand when they were trying to unscrew the tank. When you have placed your hands under the pen, then turn on the battery and put it in the “fire” mode. It’s important that you do not start the pen as the battery is in the “fire” mode, because the battery may start to obtain hot.
After that, carefully pull the pen’s head from the coil. You will then have to remove the entire coil from the bottom of the pen, that may create a tight space where you can replace the coil. Carefully insert the new coil into the space. Make sure that you follow all of the instructions, and that you align the new coil in the same manner because the old one was aligned. You will then start the pen and apply the airflow control switch to create the airflow. If you follow these instructions carefully, you then will not have an issue with your new airflow device.
When you have finished replacing the coil, you will need to reconnect the battery to the electrical circuit board. Your smok vaporizer will now prepare yourself again to use, and when you love it, you will definitely benefit from the new airflow, and the beautiful flavours that it brings. If you feel that you want to purchase your own flavours, you should find out which flavours can be found in the Smok Pen selection of e-liquids.